Patch XGD3 Games LT+ 3.0

Tool Needed:

  1. Xbox Backup Creator v2.9 Build:0345
  2. AP25 Topology Data (See Below)

Patching Current Games:

  1. Until the new ABGX is released, games cannot be burned as they traditionally were.
  2. Instead We will be using Xbox Backup Creator to inject the new Topology data for your games.

Follow These Steps:

  1. Open Xbox Backup Creator v2.9.

  1. Click on the Image Tools tab.

  1. Change the Action from Extract to Inject.

  1. Hit AP25 Sector.

  1. Select the ISO you want to Patch. Then Select the corresponding AP25 Patch that you downloaded.

Master Topology Files:

  1. XGD2.COD-BO.COD-MW2.Halo-Reach.top.data.v1.bin
  2. XGD3.Profile.ID.F87A804E.top.data.v1.bin

Please Read This:

Open Me

Topology Files for iXtreme LT+ v3.0

Released: 12/25/2011

After an exhaustive development process we are pleased to release these disc
profile topology patches for the iXtreme LT+ v3.0 firmware.

These patches are based on millions of angle measurements spanning hundreds of
hours to get the most accurate values possible.

There are currently two patches available:

  1. XGD2.COD-BO.COD-MW2.Halo-Reach.top.data.v1.bin

SUITABLE FOR THE FOLLOWING GAMES ONLY:

a) Call of Duty: Black Ops

b) Call of Duty: Modern Warfare 2

c) Halo: Reach (XGD2 ONLY, don’t use this on backups of the XGD3 beta)

These games have the exact same topology and therefore can share the same
profile data. This was confirmed by doing at least 35 iterations of profile
data for each game and analyzing the results. Over millions of measurements,
not a single one deviated from the median by more than 1 degree, and there
were no cumulative effects at all. These games are identical in the way they
were mastered.

  1. XGD3.Profile.ID.F87A804E.top.data.v1.bin

Suitable for all XGD3 games with this disc profile ID:

0C3DF524599094E6CB87ECC8-F87A804E

This covers all current XGD3 releases (at the time of writing) except for
the Halo: Reach XGD3 beta.

Check bit.ly/ap25list and stay up to date with the latest news on the usual
sites so you don’t end up patching and burning the wrong data if a new XGD3
game comes out with a different disc profile ID (there are several more
already waiting in dae.bin).

Media ID shouldn’t matter since we always check our data against all foreign
versions of games in DAE.bin using the targets from the v12 table and several
unique per-Xbox v8 tables. Again, stay up to date with the latest news in case
this situation changes.

P.S. You may be thinking that it’s better to use topology data taken from a
specific title or pressing… and that may be true… but only if you do a
multitude of iterations and take the average values. You would most likely
end up with extremely similar data to ours (if your drive and disc are OK),
with only very small deviations where measurements were right in between two
integers, and could effectively go either way.

We certainly don’t want to discourage people from doing their own measurements,
but please be aware that it is very easy for some drives to screw up an angle
measurement, and even small screw ups or a general bias in timing can have a
great impact on LT+ responses.

P.P.S We’ve included an example of how we process our multitudes of iterations
in case you think this is all a bunch of BS. It’s a massive html file so be
careful if you don’t think your system or browser can handle it.

More patches will be released in the coming days or weeks as required.

Thanks go to c4eva, Seacrest, Team Jungle & Team Xecuter.

Enjoy and Merry Christmas! We look forward to all future challenges in 2012.

Confirmed Games:

Open Me

Call of Duty: Modern Warfare 3 (Master Topology File 2)
TESV: Skyrim (Master Topology File 2)

Big thanks to C4eva and everyone else who made this possible!

Finally! Great tutorial AS USUAL by you :stuck_out_tongue:

Video if you want to include it/follow the video for those who prefer them :smile:

http://www.youtube.com/watch?v=JXGsGoL_EkY

Good wich one is battle field3

Its the second .bin file.Read the spoiler and you will see that it covers all xgd3 releases not covered in the first one.

I can personally confirm that Topology File 2 works with MW3. I just patched it and then burnt it and loaded it successfully. Also, I didn’t have any title updates on my xbox once I loaded up MW3 I had to update the game and everything worked perfectly.

I have tried the data with SR3 and Skyrim. Neither want to work for me

Try these: https://www.wemod.com/forum/37-diamond-downloads/91794-topology-data-lt-v3-0-a.html#post866381
http://www.xbox360iso.com/lt-3-0-t535839.html

thanks, hopefully abgx gets updated so this is done automagically!

I can personally confirm that Topology File 2 works with Skyrim. I just patched it and then burnt it and loaded it successfully. Also, I didn’t have any title updates on my xbox once I loaded up Skyrim I had to update the game and everything worked perfectly.

Is there anything i need to do after i inject the data? (Besides Burn) I just put the DVD file in ImgBurn?

Nope, only thing you have to worry about is the writing settings. I currently use a iHAS-124B Burned with the firmware by c4eva, plus and extra edit that makes Disc ID: MBIPG101-R10-65 burn at 2.4x speed. It took me a few days to figure out the best setting for my Media. I use Kodak discs and hasn’t had a coaster since I figured out the settings.

Almost done burning Skyrim :smiley: So excited :smile:
edit: IT WORKS!!! 111111

Glad to see that, I have only done 2 games so far but they both worked flawlessly.

I can confirm that the following games work:
Halo Combat Evolved Anniversary with master topology data 2
Modern Warfare 2 with master topology data 1
Skyrim with master topology data 2
haven’t tested any more.

Please include which file you used to patch the iso.

Can I just patch an already burnt game?

No you have to reburn the game after patching it

Shop Amazon - Buy Eligible Print Magazines & Get Digital Kindle Subscriptions Free

60-Day Total Body Conditioning Workout DVD Program

GOdaddy Domain$1.99


sorry to reply to an old post, but the links have now been deleted and i cannot find the gd3 patch anywhere, on the topology site theres a link for it but bit.ly isnt working on my computer so cant access the file