How to install a DemoN dual NAND chip into a Phat or Slim Xbox 360

[NMods]

Note: These tutorials do not cover how to install the JTAG or RGH hack. To find out how to install the JTAG or RGH hack please look at my signature.

Supplies Needed:

1. Team Xecuter DemoN
2. Soldering Iron, Solder, Flux

---

Phat Tutorial

1. Installation Points

Open Me

2. The chip after installed

[details=Open Me]

[/details]
3. Ribbon Cable Installation

[details=Open Me]

[/details]
4. Coolrunner Ribbon Cable Converter & CR_EN Installation

[details=Open Me]

[/details]
5. Ribbon Cable to Converter Installation

[details=Open Me]

[/details]
6. NAND Toggle Switch Installation

[details=Open Me]

[/details]
7. NAND Toggle Switch Ground Cable Installation

[details=Open Me]

[/details]

Slim Tutorial

1. Installation Points

Open Me

2. The chip after installed

[details=Open Me]

[/details]
3. Ribbon Cable Installation

[details=Open Me]

[/details]
4. Coolrunner to Ribbon Cable Converter & CR_EN Installation

Open Me

5. Ribbon Cable to Coolrunner Installation

Open Me

6. NAND Toggle Switch Installation

[details=Open Me]

[/details]
7. NAND Toggle Switch Ground Cable Installation

[details=Open Me]

[/details]

Credits
Majority of the credit goes out to Team-Xecuter
Some of the credit goes to me for actually taking the time to copy and paste some picture links.