Need Help, getting an error! [Horizon]

Horizon - Xbox Support
1

Well, I haven’t used Horizon in over a year since I would always get errors. I have done everything to try and fix this but nothing would work.

I have the updated Horizon program.
Also on Windows 7.

Anyways when I use the Achievement Unlocker… half way through, it will give me an error. Which would say;

http://prntscr.com/4kac7k (Image)

Here is the full text below.

[details=Open Me]See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.ObjectDisposedException: Cannot access a closed Stream.
at System.IO.__Error.StreamIsClosed()
at System.IO.MemoryStream.Write(Byte[] buffer, Int32 offset, Int32 count)
at System.IO.BinaryWriter.Write(Byte[] buffer)
at (Object , Byte[] )
at A.YBC.E(Object E, Byte[] H)
at A.UP.I()
at A.FQ.Horizon(Int32 E, RP& H)
at A.FQ.U(UInt32 E, UInt32 H)
at A.GQ.Flush()
at System.IO.BinaryWriter.Flush()
at (Object )
at A.PWC.H(Object E)
at A.GD.E(Object E)
at A.SEB.Horizon(FEB E, Byte[] H)
at A.SEB.Horizon(EEB E, Byte[] H)
at A.SEB.E(EEB E, Byte[] H)
at A.YKB.Horizon(XKB E)
at A.YKB.E(XKB E, Boolean H, DateTime I)
at A.PDB.Horizon(Int32 E, Boolean H)
at A.PDB.Horizon(Object E, EventArgs H)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at DevComponents.DotNetBar.ButtonX.OnClick(EventArgs e)
at DevComponents.DotNetBar.ButtonX.OnMouseUp(MouseEventArgs e)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at DevComponents.DotNetBar.PopupItemControl.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5472 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll

Horizon
Assembly Version: 2.8.0.1
Win32 Version: 2.8.0.1
CodeBase: file:///C:/Program%20Files%20(x86)/Daring%20Development/Horizon/v2/Horizon.exe

System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5467 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll

DevComponents.DotNetBar2
Assembly Version: 8.9.0.5
Win32 Version: 8.9.0.5
CodeBase: file:///C:/Program%20Files%20(x86)/Daring%20Development/Horizon/v2/DevComponents.DotNetBar2.DLL

System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5468 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll

System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5467 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll

Ionic.Zlib.CF
Assembly Version: 1.9.1.5
Win32 Version: 1.9.1.5
CodeBase: file:///C:/Program%20Files%20(x86)/Daring%20Development/Horizon/v2/Ionic.Zlib.CF.DLL

ICSharpCode.SharpZipLib
Assembly Version: 0.86.0.518
Win32 Version: 0.86.0.518
CodeBase: file:///C:/Program%20Files%20(x86)/Daring%20Development/Horizon/v2/ICSharpCode.SharpZipLib.DLL

System.Data.SQLite
Assembly Version: 1.0.65.0
Win32 Version: 1.0.65.0
CodeBase: file:///C:/Program%20Files%20(x86)/Daring%20Development/Horizon/v2/System.Data.SQLite.DLL

System.Data
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/windows/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll

System.Management
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/windows/assembly/GAC_MSIL/System.Management/2.0.0.0__b03f5f7f11d50a3a/System.Management.dll

System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll

System.Core
Assembly Version: 3.5.0.0
Win32 Version: 3.5.30729.5420 built by: Win7SP1
CodeBase: file:///C:/windows/assembly/GAC_MSIL/System.Core/3.5.0.0__b77a5c561934e089/System.Core.dll

System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll

nij3i41c
Assembly Version: 0.0.0.0
Win32 Version: 2.0.50727.5467 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll

Accessibility
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/windows/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging=“true” />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.[/details]

If you read the end of that error it says;

[details=Open Me]************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging=“true” />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.[/details]

I think that might be the error. How would I enable this “JIT Debugging” or something?

Also I get this error when I “Save Rehash and Resign” really annoying when I’m modding my saves… This happened to me many times.

Also does anyone know an alternative program where I could only “Save, Rehash and Resign”?

2

A similar thing would happen to me with a FalloutNVSE when I tried to mod too much at one time. How much are you trying to mod at once?

3

Hmm, if you want after I am done helping another member which should only be a couple minutes I could teamview with you and help fix the problem.

4

I’ve been only trying to mod one thing.

For example… When I try to make a Gamer Picture Pack and Save Rehash and Resign, I would get the error.

When I try to mod a Game Save and Save to Device, I would get an error.

When I try to Mod an Achievement and click “Unlock All” for that specific game, I would get an error (As shown on the thread) Weird.

Horizon is completely useless cause of this error :stuck_out_tongue: Also the program would “Stop Working” if I click Continue or Exit when that error pops up.

5

Okay I fixed the other member’s problem, if you want I can try to fix the problem through Teamviewer if you want.

6

“Have you tried restarting it?”

But seriously, the only thing I can recommend is reinstalling it from this link, here

7

-.- Of course I have.

And I have used those links.

8

It’s a coding issue in the, “system.windows.forms section.”

This is how it should look:

<configuration>
<system.windows.forms jitDebugging=“true” />
</configuration>

But instead it probably looks like this

<configuration>
<system.windows.forms jitDebugging=“false” />
</configuration>

and also like this

[assembly:System:: Diagnostics:: DebuggableAttribute(true, true)];

but instead it looks like this

[assembly:System:: Diagnostics:: DebuggableAttribute(false, false)];

9

So uhm how would I fix this? Do you think this could be the cause of the error?

10

It’s in the .Net Framework, uhm did you try uninstalling your .Net Framework and reinstall it?

11

I just got an error it says cannot access a closed stream can anyone help me plaza

12

This thread is over 2 years old.
Make a new thread. There make a screenshot of the error.

13

What one of you guys is plaza ?

14

any fixes ? i get the same error !

15

Can one of the mods close this thread? Thanks in advance!